10MHz high precision underwater ultrasonic transducer for Doppler galvanometer

10MHz high accurate underwater ultrasonic transducer for doppler current meterTechnical parameters:   ItemsTechnical ParametersImageName10MHz underwater ultrasonic transducerModelPHW-10M-01BFrequency10MHz±5%Detection Distance0.005 ~ 0.3mMinimum Parallellmpedance Capacitance Sensitivity&n

Featured Products

10MHz high accurate underwater ultrasonic transducer for doppler current meter


Technical parameters:
 
 
 
ItemsTechnical ParametersImage
Name10MHz underwater ultrasonic transducer
10MHz High Accurate Underwater Ultrasonic Transducer for Doppler Current Meter

10MHz High Accurate Underwater Ultrasonic Transducer for Doppler Current Meter
ModelPHW-10M-01B
Frequency10MHz±5%
Detection Distance0.005 ~ 0.3m
Minimum Parallel
lmpedance
 
Capacitance 
Sensitivity 
Operating VoltagePeak Voltage<Vpp
Operating Temperature-40~+80ºC
Pressure≤10Kilos or 1MPa
Angle(Beamwidth)Half-power Beam
Width@-3dB:1.1°±10%,
Sharp Angle:2.6°±10%
Housing Materialcomposite material
UsageDoppler current meter, underwater distance
Installation DimensionChecking product structure diagram
below
Protection LevelIP68
Weight10g±5%
Wiring Instructions    Red+,White-,Black: shielded wire;
(temperature sensor is optional)
Admittance CurveProduct Structure Diagram

 
10MHz High Accurate Underwater Ultrasonic Transducer for Doppler Current Meter
 
 
  

Block diagram of ultrasonic transducer :

10MHz High Accurate Underwater Ultrasonic Transducer for Doppler Current Meter

Schematic Diagram of Temperature Sensor (model: MF58_502F3470):

10MHz High Accurate Underwater Ultrasonic Transducer for Doppler Current Meter

Integrated type Cable instruction:   
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +      
White: transducer -         
Black: shielding


10MHz High Accurate Underwater Ultrasonic Transducer for Doppler Current Meter

2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)

10MHz High Accurate Underwater Ultrasonic Transducer for Doppler Current Meter
Red and black are temperature sensor wiring



 Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB

Three-core wiring instructions:                
                        
    Red: Transducer +
     Blue: temperature sensor +
     Black: Public-

10MHz High Accurate Underwater Ultrasonic Transducer for Doppler Current Meter

 Four-core wiring instructions:

Red: Transducer +                      
Yellow: Transducer-
Blue, black: temperature sensor


10MHz High Accurate Underwater Ultrasonic Transducer for Doppler Current Meter




 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours